...




Where can I find this?




I dont want to start new topic for this mobo ( ASR...


I dont want to start new topic for this mobo ( ASRock p4s61) same prob. i cant get 1440X900 resolution on my widescreen, so cp can u pls send me patched bios

thx in advance




ty sharedoc,
i'm sorry if i'm going to anno...


ty sharedoc,
i'm sorry if i'm going to annoy you but i really don't know how to modify the pin.can you help me doing that?
ty




disable the floppy controller and boot from a cd r...


disable the floppy controller and boot from a cd rom. don't forget to set drive a to NONE.

i have several (e)eprom programmers. anyway, you can boot a board of your choice to dos, remove the bios chip while running, pop your bios chip in and fire up uniflash. keep in mind the different programming voltages and almost nothing can go wrong.

the cmos is cleared when you remove the battery or set the jumper to clear cmos. the cmos is some sram that only keeps its data if power if supplied. thus the battery. once the power source is gone, the data is gone, too.
_________________
If you email me include [WIMSBIOS] in the subject.




my system is older than 3 years but after reflashi...


my system is older than 3 years but after reflashing to the original bios everything is just fine so i know its not the battery. i have tried applying failsafe defaults which boots fine but i am having trouble figuring out which setting is causing it to hang after restarting. it is a First international am37L motherboard. i have 768 megs of ram and an athlon xp 2000 cpu. i guess it is just going to take a lot of time and trail and error to figure out which setting to disable.
thanks




Do you know if your hub is self-powered (plugged i...


Do you know if your hub is self-powered (plugged into the wall), and if so, is it set to self-powered mode (many hubs have a small switch)? You may want to experiment with this (also you may want to try plugging directly into the PC)

-Jon




nice attitude.
_________________
best wi...


nice attitude.
_________________
best wishes
max

www.redfacilities.com

2 x dual 2.5 g5 | 4gb ram | mac os 10.4.11 | nu4.3 | rme multiset/audiolink96 | 3 x 19" flat panels | decklink xt | waves6 | altiverb6 | mc mix




so when i type in the command to use the bios data...


so when i type in the command to use the bios datafile i would use the file extension .rom instead of .bin as wimsbios instructs?

thanks for the links




I've stopped trying p3-450 on SE440BX original. To...


I've stopped trying p3-450 on SE440BX original. Too many issues for one reason or another. I think we've sold only a handful of them with P2-300 of which most are now written off so it was futile to try and find out what the exact problem was. May have been as simple as a weak power supply, I don't know.
_________________
edwin/evasive

Do not assume anything

System error, strike any user to continue...




1.Check if you have the newest bios installed


1.Check if you have the newest bios installed

ftp://ftp.acer-euro.com/notebook/TravelMate_73X/BIOS/


2. Try contacting the german guy using the messageboard




1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52